 |
RS232 to RS485 Converter ,2-Wire half duplexor and 4-Wire full duplex
Automatic turnaround/RTS-controlled (Jumper selectable)
|
|
RS232 TO RS485 Converter / USB to RS485 Converter
| รหัสสินค้า : |
GPCONV4409 |
| Package : |
Set |
| Packing : |
Box |
| น้ำหนัก (กรัม) : |
200.00 |
| สินค้าคงเหลือ : |
Call |
| ผู้ผลิต : |
Interface |
|
RS232 to RS485 Converter
The RS232 to RS485 Converter(Model : CONV232TO485) allows RS-232 equipment to utilize RS-485 networks, oper-ating in either point-to-point or multi-point, 2-or 4-wire. The CONV232TO485 is one of the most cost effective RS-485 solutions on the market. Use with your standard PC or Laptop to control RS-485 devices directly with no special software required. Any standard communications software for your RS-232 serial ports will work. Plugs directly into standard DB9 male RS-232 port that comes with your PC or convert any number of your RS232 ports on a multiple port card with DB9 connectors to RS-485. You can also make a RS-232 device a RS-485 device on a RS-485 network.
|
RS232 to RS485 Converter Specifications
|
Application: |
2-Wire half duplexor and 4-Wire full duplex |
|
Supply voltage: |
DC 7-14 V |
|
Data Rates: |
110 to 115.2 Kbps Automatic Selection |
|
Transmit enabled: |
Automatic turnaround/RTS-controlled (Jumper selectable) |
|
LED status indicators : |
Power,Txd/Rxd,Full/Half,RTS/Auto |
|
RS485 drivers: |
Up to 1200 m using 26AWG twisted pair wire at 115.2 k Baud into 120 Ohm loads.
|
|
RS485 Bias: |
680 Ohm pull-up and pull-down (Jumper selectable). |
|
RS485 Termination: |
120 Ohm (Jumper selectable). |
|
Number of RS-485 nodes: |
32 Node |
|
Power Reverse protection: |
YES |
|
RS232 Connector: |
DB9 D-Subconnector |
|
RS485 Connector: |
MODULAR JACK 6P6C RJ11/Terminals Block Connector |
|
Humidity: |
5-95% Non-Condusing |
|
Case Meterial : |
Metal (Gray Color) |
|
Casing Size : |
W=62,H=80,D=25 mm |
|
Datasheet & More Detail
 >Click Here!<
|
|
File : /usr/local/psa/home/vhosts/ee-part.com/httpdocs/productdetail.php
Line : 744
select
productseealso.productseealso_id,
productseealso.productsubcategories_id,
productseealso.product_id,
product.productsubcategories_id as temp,
product.product_name_th,
product.product_shortdescription_th
from productseealso, product
where
(
productseealso.productsubcategories_id = '69' and
product.product_id = productseealso.product_id and
product.product_id <> '181'
)
order by productseealso_id
1016 : Can't open file: 'productseealso.MYI'. (errno: 130) |
